Biped Arduino project (FIPS-BOT-1), part 1 of n
Posted: Sun Jan 13, 2013 4:18 pm
Part1 Part2 Part3 Part4 Part5
I've finally started working on my Arduino robot project. Originally, I wanted to build a four-legged robot, but later decided to make a simple biped instead. I rather wanted a robot with a strong personality :), which such a human-like creature might hopefully become.
So I started by cutting and bending two servo brackets from sheet metal (0.75 mm), and then drilled some holes for attaching the servos. It's been going pretty smoothly so far, you can see the result here:
I've finally started working on my Arduino robot project. Originally, I wanted to build a four-legged robot, but later decided to make a simple biped instead. I rather wanted a robot with a strong personality :), which such a human-like creature might hopefully become.
So I started by cutting and bending two servo brackets from sheet metal (0.75 mm), and then drilled some holes for attaching the servos. It's been going pretty smoothly so far, you can see the result here:
