1. 4FipS.com
  2. Photos
  3. Videos
  4. Code
  5. Forums
  6. pfQuizzz
  7. About

4FipS.com Forums

Forums dedicated to the projects hosted at 4FipS.com

Skip to content

Evolution of the ultimate time-lapse machine

> About coding, hacking, photography, and such...

Evolution of the ultimate time-lapse machine

Postby FipS on Mon May 14, 2012 8:23 pm

After buying my first digital SLR a few years ago, I found a great new use for my previous compact camera Canon Digital Ixus 400. I quickly realized that Ixus could actually serve me as a perfect camera for Time-lapse photography. During the past few years, I had been more that satisfied with its image quality so the only problem to solve was: How to trigger the camera automatically?, as it had no such functionality built in as it's quite common in today's cameras.

So I decided to make use of my old Psion 3c handheld (BTW, It's still a great piece of hardware, superior in many ways to the modern mobile phones and netbooks, but that's a completely different story) and brought to help the OPL programming language to automatically trigger the serial port of the Psion computer, which I then connected to the camera's shutter through an Opto-isolator. By far, the most difficult step was to disassemble the camera to hook up the wires. After that I had a fully functional time-lapse machine ready to use as you can see in the image below:


Although, I was quite happy with the setup above and had taken a great bunch of videos (2) with it, I started to think about something smaller and lighter, which could replace the whole Psion-thing. It was at the same time I learned about the Arduino project, which is a small easily programmable hardware platform for hobbyist that could be turned into a camera trigger with almost no effort. It all seemed quite promising, but I wanted to go even further, or smaller, if you like, and come across Atmel's ATtiny:

Youtube / How-To: Shrinkify Your Arduino Projects:

Using ATtiny, I could enjoy the comfort of the Arduino ecosystem, however, resulting in even more compact and less power hungry projects. That was exactly what I was looking for. So I started to wire things up. First, I made a working prototype involving Arduino itself, and then switched the Arduino into a programmer and loaded the original program into an ATtiny85 chip. It all worked perfectly on the breadboard:


Finally, I turned the prototype into a nice compact board powered by just a single CR2032 battery. I was more than satisfied with the result and moreover it all took me just a few days to finish without any previous experience with neither Arduino nor ATtiny. What a great platform!


Just for the sake of completeness, here are both the original Psion program and the one that drives Arduino/ATtiny:
Code: Select all
(c) 2012 +++ Filip Stoklas, aka FipS, http://www.4FipS.com +++
ARTICLE URL: http://forums.4fips.com/viewtopic.php?f=3&t=717

const int out_pin = 4;
const long interval = 2500; // 2.5 s
const long edge_duration = 250; // 250 ms
const long sleep_duration = interval - edge_duration - 250; // 250 ms to wake-up
long old_time = 0;

void setup()
  pinMode(out_pin, OUTPUT);

void loop()
  const long time  = millis();
  const long delta = time - old_time;
  if(delta >= interval)
    digitalWrite(out_pin, HIGH);
    digitalWrite(out_pin, LOW);
    old_time = time;

Code: Select all
PROC Main:
    local n&, tm&, otm&, del&, per&

    per& = 3
    dInit "Time-lapse Shutter by FipS"
    dLong per&, "Enter sampling period (sec):", 1, 3600
    dText "", "ver 1.2 (2010), www.4FipS.com"

    n& = 1
    otm& = TimeSec&: - per& + 1
        tm& = TimeSec&:
        print tm&
        del& = tm& - otm&
        if del& >= per& rem ### interval (sec) ###
            print "#"; n&, ":", tm&; "s +"; del&
            otm& = tm&
            n& = n& + 1
    until 0

PROC TimeSec&:
    local h&
    h& = Hour rem cast to prevent overflow
    return Second + Minute * 60 + h& * 3600

PROC Activate:
    lopen "tty:a"
        pause 5 rem ### 250 ms ###

And here is the final setup in action:
User avatar
Site Admin
Posts: 143
Joined: Wed Nov 12, 2008 9:49 pm
Location: Prague

Evolution of the ultimate time-lapse machine



Return to 4FipS.com General Discussion & Blog

Who is online

Users browsing this forum: No registered users and 2 guests